Menu

VLF Sine Wave 45 kV

VLF Sine Wave 45 kV - Sine Wave VFL System with Integrated Tan Delta

  • Test capacity of up to 10µF – that’s up to 40 km or 25.8 miles of cable at reduced frequency and voltage
  • Internal tanδ option with automatic results interpretation
  • One minute burn after fault detection
  • Automatic frequency adjustment based on cable length
  • Adjustable DC pulse rates of 1:3 and 1:4
  • IEEE compliant withstand testing for new installations up to 25 kV
  • IEEE 400.2 compliant maintenance testing up to 35 kV
  • IEC 60229 compliant sheath testing up to 20 kV DC

The VLF Sine Wave 45, with optional integrated tanδ, is a compact system for commissioning, testing and condition analysis of medium-voltage cables. This unit performs very low frequency (VLF), DC, and sheath integrity testing as well as sheath fault pinpointing when combined with the optional ESG NT step voltage probe. Ideal for both routine testing and complicated diagnostics, the VLF45 has a multi-purpose design with a continuous duty cycle.

For 0.1 Hz sine wave, rectangular or DC voltage tests, the VLF45 provides enhanced voltage quality and stability. In the event of excessive charge current integrated breakdown detection shuts down the test, ensuring limited damage to the cable. Up to 1000 measurements can be stored in the internal memory and results can be viewed on the unit or downloaded via the USB port to the included Easyprot software for reporting.

An optional internal tanδ is available that automatically evaluates results for PE, XLPE and PILC type cables based on insulation and selected compliance standard. Combined with the optional ESG NT step voltage probe, the VLF45 can pinpoint sheath faults.

MeggerBook Cable & MeggerBook Report Edition
MeggerBook Cable & MeggerBook Report Edition Software
 
The setup file below is suitable for the installation of both MeggerBook Cable (full version) and MeggerBook Report Edition (free limited version).
 
When started with a suitable license dongle plugged into the installation PC, the software starts as MeggerBook Cable which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here .
 
Without the required dongle the software starts as MeggerBook Report Edition which allows for seamless report creation and offers the same features as the full version while limiting the data storage options as follows:
 

•  Measurements, analyses and reports are not permanently stored in the database

•  While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor  of the Report Edition

 

At this time, the software can handle the measurement and test data of the following Megger devices:

 

Test vans:            Centrix, Centrix City, Compact City, R30, Variant

Test systems:     VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60

TDRs:                     Teleflex VX(-P), Teleflex SX

 

Note for test systems VLF Sine Wave 45 and VLF Sine Wave 62:

 

Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher. The latest firmware can be found here (VLF Sine Wave 45) and here (VLF Sine Wave 62).

 

Setup-MeggerBook-2-4-7.zip
57.0 MB | 10/10/19
MeggerBook Report Edition Quick Guide
Quick_Guide_Report_Edition.pdf
809.3 KB | 25/09/19
VLF Sine Wave 45 Firmware

Important: When upgrading from a firmware version <3.14 make sure to export all the test data you may still need for reporting purposes to a USB flash drive. Due to a change in the data format, old data will not be available for export after the update!

Installation instructions:

1. Extract the zip archive to the root folder of your USB flash drive.

2. Plug the USB flash drive in your VLF Sinus test system and turn it on.

3. Access the system menu via themenu item.

4. Select themenu item. The USB flash drive is scanned for appropriate firmware and language files which are then offered for selection.

5. Scroll down and select the application file (.img). The firmware update starts and may take a few minutes.

6. After the update has been finished, the system reboots automatically.

7. Perform steps 3 to 4 again to install your preferred language file(s).

VLF Sine Wave 45 Firmware
VLFSinus45_3-14.zip
31.3 MB | 25/09/19