
About the product
- Bright and large display
- Easiest operation via self guiding and explaining menus
- ARM multi-shot technology
- Automatic storage of all results
- Supports all existing prelocation technologies
- Automatic detection and display of cable end and fault position
- Screen keyboard
The Teleflex VX reflectometer is the latest development in the Teleflex series. As with all Teleflex reflectometers, the VX is specially designed for the rapid processes of power cable fault location. The new hardware offers significantly improved parameters including sampling rate, pulse width, and pulse amplitude resulting in a wider range up to 1000 km, higher resolution and above all, improved measurement.
The ProRange function allows for range-based gain adjustments, displaying distant reflections with the same amplitude as from short distances. Data can be easily transferred using the USB drive using either the MeggerBook Cable software format or a PDF, or it can be sent directly to a printer.
Measuring hardware and display are separated and communicate via Ethernet. This allows for easy integration into a fault location system and allows it to be operate in offshore applications, for example, in the remote operation in ROVs.
Technical specifications
- Length measuring range
- 1280 km/7506 mi
- Output pulse voltage
- 30 - 160 V
Product documents
Software and firmware updates
MeggerBook Cable & MeggerBook Report Edition
MeggerBook Cable & MeggerBook Report Edition Software
latest version
The setup file below is suitable for the installation of both MeggerBook Cable (full version) and MeggerBook Report Edition (free limited version). For further information read the MeggerBook quick start guide
When started with a suitable license dongle plugged into the installation PC, the software starts as MeggerBook Cable which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here .
Without the required dongle the software starts as MeggerBook Report Edition which allows for seamless report creation and offers the same features as the full version while limiting the data storage options as follows:
• Measurements, analyses and reports are not permanently stored in the database
• While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor of the Report Edition
At this time, the software can handle the measurement and test data of the following Megger devices:
Test vans: Centrix, Centrix City, Compact City, R30, Variant
Test systems: VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60
TDRs: Teleflex VX(-P), Teleflex SX
Note for test systems VLF Sine Wave 45 and VLF Sine Wave 62:
Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher.