Menu

Teleflex® SX-1

Teleflex® SX-1

Portable Time Domain Reflectometer
Portable Time Domain Reflectometer
Product Documents
  • Standalone operation or operation in conjunction with surge wave generators (thumpers)
  • Single jog dial operation with piechart interface and No-User-Intervention Auto mode ARM®
  • Multishot technology with 15 fault traces per arc reflection shot
  • ProRange distance-dependent de-attenuation for significantly improved images of far-away reflections
  • Supports all existing HV prelocation methods
  • Auto-ranging cable end recognition, Auto-find cursor to fault position
  • Rugged, robust, outdoor field-ready case

The Teleflex® SX-1 is a portable 2-channel time domain reflectometer (TDR) designed to provide quick, effective, accurate and safe prelocation of faults in cable installations. Operation of the instrument is via a single jog dial and an intuitive, well-proven piechart interface. The large and bright colour display with touchscreen functionality further enhances operator comfort and supports rapid and accurate results. The Teleflex SX-1 is powered from its internal rechargeable battery and may be operated in battery only mode or via smart charger connected to a mains power supply.

Technical Documents
Technical guide
MeggerBook Cable Brochure
MeggerBook Cable & MeggerBook Report Edition
MeggerBook Cable & MeggerBook Report Edition Software
 
The setup file below is suitable for the installation of both MeggerBook Cable (full version) and MeggerBook Report Edition (free limited version).
 
When started with a suitable license dongle plugged into the installation PC, the software starts as MeggerBook Cable which allows for easy and comprehensive data evaluation, data archiving, cable management and report creation. A personal quotation for a certain number of licenses can be requested here .
 
Without the required dongle the software starts as MeggerBook Report Edition which allows for seamless report creation and offers the same features as the full version while limiting the data storage options as follows:
 

•  Measurements, analyses and reports are not permanently stored in the database

•  While cable import and storage are not limited, a maximum of 5 cables can be created using the cable editor  of the Report Edition

 

At this time, the software can handle the measurement and test data of the following Megger devices:

 

Test vans:            Centrix, Centrix City, Compact City, R30, Variant

Test systems:     VLF Sine Wave 45 / 62, VLF CR 40/60, TDS 40/60

TDRs:                     Teleflex VX(-P), Teleflex SX

 

Note for test systems VLF Sine Wave 45 and VLF Sine Wave 62:

 

Data of these test systems can only be imported into the software, if the test systems is equipped with firmware version 3.14 or higher. The latest firmware can be found here (VLF Sine Wave 45) and here (VLF Sine Wave 62).

 

Setup-MeggerBook-2-4-7.zip
57.0 MB | 22/11/19
MeggerBook Report Edition Quick Guide
Quick_Guide_Report_Edition.pdf
809.3 KB | 22/11/19