Menu

EZ-RESTORE Overdrive

EZ-Restore Overdrive

  • Has back-feed alert
  • Weighs less than 48.5 lbs
  • Offers unique USB load
  • Has trans-flective color LCD

The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit. Possessing a measuring range up to 25,000 feet, the EZ-RESTORE OVERDRIVE offers fault-distance accuracy less than 2.5 feet (depending on displayed range). Additionally, the system allows for computer-controlled automatic sectionalizing and fault locating with a simple “turn and click” operation.

E-Tray Software

ETRAY SOFTWARE UPDATE NOTICE

APPLIES TO: T3090, EZ-RESTORE, EZ-THUMP AND SMART-THUMP

SOFTWARE UPDATE WARNING:

Prior to updating the affected products to software version 2.5.2/0.43 or later, you must first consult the factory via the contact information provided below to determine if your instrument hardware can support the upgrade. Failure to consult the factory prior to performing software upgrades could leave your instrument in a state that will require it to be sent in for repair.

Please have the following information ready before you call:

Contact Us

Customer Service: 1-800-723-2861

ETray Software
This is the software for use in the following products:
• EZ-Thump
• EZ-Restore Overdrive
• Smart-Thump
• T3090
File Date/Revision: Software Update 2.6.1.7 / Firmware 0.48
SHA1:
651b35d8f8e33c341cf8698aac8bf36206c2f6e7
ETrayUpdate-2-6-1-7-FW-0-48-111417.zip
1.2 MB | 08/02/18
E-Tray Product Update Documentation
Software release note detailing changes in E-Tray Software Update
E-TRAY-SW-PRODUCT-UPDATE-2-5-1FW0-40.pdf
166.6 KB | 08/02/18
ETray Demo for PC (Windows 7 64-bit)
File Date/Revision: 2.6.1.7
SHA1:
8797eff2581d06dbafa83efd85a23d63c2e2f8ac
ETrayDemo-v2-6-1-7-25Oct2017.zip
8.0 MB | 08/02/18